Digiweigh DWP-PC Bedienungsanleitung

DWP-PC SERIES PRICE COMPUTING SCALE User’s Guide PLEASE READ THIS MANUAL VE

5. INITIAL SETUP 5.1 INTERNAL SETTINGS Preferred application parameters can be checked or set through internal functions. Refer to 5.4 fo

6. INSTRUCTION FOR USE 6.1 POWER ON Powered on the instrument, instrument displays: - a. software and revision number and capacity of instrumen

Tare function is used to temporarily set the instrument to zero (such as cancelling the weight of a box or a container) in order to get th

6.4.2 Manual Tare2 When a container is used, follow the below steps to tare the weight of the container off to get a net weight result. a. Remove al

a. Refer to 6.2 and 6.4 for zero, selecting preferred weight unit and tare operation, b. Enter the unit price per quantity ,Press [QTY], now the u

b. The instrument: -  displays “ACC” on Weight Panel. ACC denotes data has been accumulated to memory,  displays “n” on Unit Price Pa

transmission. Baud rate has to be set before proceeding to other settings. 7.1 PC (COMPUTER) MODE Weight status and data are sent under the PC (Comp

CONTENTS 1. INSTALLATION 2. SPECIFICATIONS 3. KEYS, DISPLAY AND CONNECTIONS 4. GETTING STARTED 5. INITIAL SETUP 6. INSTRUCTION FOR USE

7.2 PRT (PRINTER) MODE 7.2.1 Printing Current Transaction A standard printout as will be sent through the RS232 Comport when [PRINT]9 is p

Standard Printout Sample Description 1. Date of printing, 2. Time of printing, 3. M+ sequent number10 4. Tare Weight, 5.

8. BATTERY POWER AND RECHARGING Remaining battery power of the built-in rechargeable battery is displayed on the Battery Power / Level Indicator.

9. ERROR CODES Error Code No. Description Err 1 Time value error Err 2 Date value error Err 3 Exceed maximum manual zero range Err 4 Offset out of ran

10. DAILY CARE AND MAINTENANCE  Clean the instrument with a soft, damp cloth. If necessary, use a mild detergent in water,  Do not use any ha

Calibration Turn on the scale and press/hold the tare key for 4 sec then Let go and it will display F1, with the “Print” button go to F10 Cal Pres

1. INSTALLATION Because of metrological legislation, installation/some metrological parameter settings are limited to be done by authori

2. SPECIFICATIONS 2.1 GENERAL SPECIFICATIONS Common Specification Stabilisation time 2 second typical Operating temperature 5°C - 35°C Pow

3. KEYS, DISPLAY AND CONNECTIONS 1. CH KEY Press this key to change status . Payment is entered by numeric keys. 2. WEIGHT UNIT KEY Pres

8. ZERO KEY Press this key to set weight displayed to zero when an empty scale has drifted away from a true zero reading. 9. CE KEY Pres

11. BATTERY POWER / LEVEL INDICATOR This indicator appears to show:-  The instrument is running on the built-in rechargeable battery,  It show

C. TOTAL PRICE PANEL Quantity value is shown here. D. BUBBLE LEVEL Refer to this bubble to obtain a horizontal position for the instrument. E.

4. GETTING STARTED In order to obtain accurate weighing and total price result, the instrument must be placed on a strong and level surface horizo